Additional COM ports
Материал из WebHMI Wiki
Версия от 11:14, 5 января 2018; Evgeniy.mozoliak (обсуждение | вклад)
You can add additional COM ports to WebHMI using USB-COM converters. Поддерживаются распространенные чипы таких производителей: Popular chips of such manufacturers are supported:
- FTDI
- CP2103 Silicon Labs
- Prolific PL2303
- QinHeng Electronics CH340/341
After installing such a converter in the system, when configuring connections, it will be possible to select an additional serial port:
A special case of such a connection can be a direct connection of a PLC or other device to the USB port of WebHMI (usually a micro USB cable) directly. Onboard the PLC, in most cases, one of the above-mentioned USB-COM chips is installed.
